Product Overview
Fine Serrated Polishing Hone
The ultimate serrations accessory for your Lansky® Sharpening System. This 1000 grit Ceramic Serrated Polishing Hone lets you achieve a factory-style finish on already sharpened serrations.
Key Features:
- Fine Grit (1000) Ceramic Hone
- Brass Threaded Insert for Stainless Steel Thumb Screw
- Ergonomic Plastic Housing
- Fishhook Groove
*This product is not included in any kit; it is only sold separately.
Suggestions
This product is for use with the Lansky® Controlled Angle sharpening Kits.
1. Sharpening a serrated blade is just as easy as sharpening a conventional blade.
2. For smaller serrations, a traditional sharpening stroke is ideal: the stone should move into the blade, toward the guide hole in the clamp.
3. For larger serrations, add a rolling motion to the traditional sharpening stroke: as you push forward into the blade, start at one side of the serration and roll along the whole groove.
4. Repeating the appropriate motion several times for each serration will help provide a consistent cutting edge.
5. After sharpening, you may notice that small steel particles accumulate on the reverse side of your blade.
To remove these:
- Flip the blade over
- Gently run the flat side of the hone up and down the length of the blade several times
Be Smart, Be Safe and Stay... An Edge Above the Rest®!
CAUTION: Knife sharpening is an inherently dangerous activity. Used properly this sharpener cannot hurt you but a carelessly handled blade or pointed object can.
